1300 879 613   sales@pneutech.com.au

Air Nozzels & Jets

nex flow nozzel jet

For reducing energy costs and noise in blowoff applications.

Pneutech is the Australian distributor for the innovative Nex Flow™ product range.

pdfDownload Nex Flow Nozzels and Jets Brochure

WHAT ARE AIR NOZZELS AND JETS – REASONS TO USE

air nozzels jets-01Air Nozzles are the smallest amplifiers for point applications.

Air Jets entrain large volumes of surrounding air through the Jet (similar to Air Amplifiers) and are more efficient than Air Nozzles. They cover a larger blowoff target than a Nozzle.

The larger the Nozzle or the Jet the greater the efficiency for flow amplification and significant energy savings can be achieved.
It is important to recognise that amplification Nozzles and Jets are “flow” amplifiers and not force amplifiers. However the more air consumed the greater the force produced.

The most important reason to use Air Nozzles or Jets is safety. All Nex Flow™ Air Nozzles and Jets meet OSHA standard CFR 1910.242(b) for dead end pressure. Noise levels are dramatically reduced with Air Nozzles and Jets in addition to lower energy use.

Air Nozzles are available in aluminium, 304 stainless and 316L stainless steel material. Air Jets are available in aluminium for all versions. The popular High Force Air jets are available in aluminium, brass and 316L stainless steel for high temperature and food service applications.

Nex Flow™ removes the confusion from Air Jets and Nozzles. You do NOT need hundreds of different nozzles. All air amplifying Nozzles produce air flows up to 25 times the compressed air consumed. Different Nozzles have different outlet sizes and the more air used, the greater the force produced. Noise reduction up to 10 dBA as well as reduced air consumption when compared to open Jets and Tubes. By maintaining a reasonable choice of nozzles most valid applications can be addressed with the Nex Flow™ range.

air nozzels jets-02  air nozzels jets-03

 

Model 47010 X-stream™ Air Nozzle - Compressed air enters at point (A). Surrounding air (B) is entrained over a specially designed profile surface by the action of the small amount of compressed air leaving the small drilled holes at point (C). This results in a concentrated high velocity, laminar flow stream of amplified air with maximised force.

Air Nozzle – Models 47001, 47002, 47003, 47003S, 47003-316L, 47004, 47004S, 47004S-316L, 47009, 47009S, 47009S-316L – Compressed air enters at point (A). Surrounding air (B) is entrained over a specially designed profile surface by the action of the small amount of compressed air leaving the ring gap at point (C). This results in a concentrated high velocity, laminar flow stream of amplified air with maximised force.

Contact Pneutech's Head Office for more information

innovative supply logos 15

Back to top