1300 879 613   sales@pneutech.com.au

Nex Flow™ Frigid-X Panel Coolers with Constant Purge!!!

Nex Flow™ has developed the new FRIGID-XTM BY-PASS SYSTEM for their line of Nex Flow™ FRIGID-XTM PANEL COOLERS.

The Nex Flow™ FRIGID-XTM PANEL COOLER BY-PASS SYSTEM allows constant purging with compressed air of a control panel, even when the FRIGID-XTM PANEL COOLER is not operating and zero air is flowing through the PANEL COOLER.

 nex flow frigidx panel cooler by pass system

In very dirty environments, it can be advantageous to have a small amount of compressed air entering the control panel when the panel cooler is not operating (turned off utilising a solenoid and thermostat package to conserve energy). This is a “constant purge” system that will keep the control panel at a slightly positive pressure continually to prevent dirty environmental air from entering, thereby keeping the control panel clean. This reduces cleaning maintenance and can extend the life of the controls. One way to do this is to drill a small hole in the solenoid valve but that would be illegal in many jurisdictions or at least against many corporate policies since that would compromise the tested electrical approval integrity of the solenoid. In addition, larger control panels many need to be “purged” with more air flow while small panels only require a negligible amount.  

The Nex Flow™ FRIGID-XTM PANEL COOLER BY-PASS SYSTEM consists of 316L stainless steel parts to withstand difficult factory environments and can be used on all classifications of Nex FlowTM FRIGID-XTM PANEL COOLERS.

 nex flow panel cooler by pass system

The FRIGID-XTM PANEL COOLER BY-PASS SYSTEM accomplishes both tasks. It is easily installed across the solenoid valve to allow for the bypass of some air flow. A control valve on the bypass sets the level of flow desired for the particular control panel where it is utilised. So both a constant purge is maintained and the level of purging air can be set to an optimum level depending on the size of the control panel. Simple, easy and reliable. Bypass system consists of a 316L Stainless steel tee and 316L Stainless steel combination tee and flow control valve connected together with a stainless bypass stainless hose.

Contact Pneutech's Head Office for more information or to purchase please visit our webstore.

innovative supply logos 2v2

Back to top